 | ||
 | ||
March 2003 USB Profibus interface with 12 MBit/s - Fieldbus connection by USB port  The USB interface is Pro USB improves the mobile set-up and configuration process of Profibus field devices noticeably. Desktop PCs as well as notebooks can be made Profibus stations within seconds based on the plug & play features of USB. The interface is bus-powered, thus not depending on exte... [more]December 2002 Configuration tool for any set-up system - DTM for HART USB interfaceThe device type manager is HART CommDTM from ifak system is now available. It can be compared to a device driver which facilitates the communication between the field devices at the HART bus and their device DTMs. It therefore supports the commissioning of the field devices from one central workstat... [more]October 2002 Tool supports equipment manufacturer in DTM developmentThe is FDT Toolkit of ifak system is ready for delivery. The toolkit enables equipment manufacturers to develop Device Type Manager (DTM) for their fieldbus devices in accordance to the FDT specification. A DTM provides comfortable device access and management, independently on the used control syst... [more]October 2002 Stationary access to CAN/CANopen networksThe interface is CAN PCI from ifak system provides a cost sensitive solution for the stationary access to a CAN or CANopen network. The interface was designed as an active component, meaning that it contains its own microprocessor. This microprocessor handles all the time-critical tasks on the CAN b... [more]April 2002 Software package isDTMcreator BaseThe isDTMcreator Base of ifak system aides the development of CommDTMs and Device DTMs conforming to the FDT specification. DTMs are the basis for the configuration and parameterization of all devices from one central workplace. In contrast to a generic generated DTM a DTM which is generated with ... [more]December 2001 CAN server with OPC interface - Flexible data monitoringThe _is CAN Server provides easy access to any CAN based network thanks to an OPC interface. It supports the OPC Standard version 2.04. Together with the CAN interface _is CAN USB the server enables mobile set-up as well as mon... [more]October 2001 You can´t change the habits...engineering on basis of the FDT conceptSince its release two years ago the FDT concept for fieldbus communication compiled by the organisations PNO and ZVEI received broad interest. Due to the experience of Thomas Hadlich, head of department of ifak system GmbH, the advantages of the Fieldbus Device Tool can’t be seen at first sight by t... [more]September 2001 Configuration tool for any set-up system - Device type manager _is Pro DTM for Profibus master interfacesThe device type manager for the Profibus interfaces of the series _is Pro (Board, USB and PCMCIA devices) from ifak system is now available. These field devices provide the communication functionality within the FDT architecture. The _is Pro DTM is compliant to the current version 1.2 of the FDT spe... [more]April 2001 Profibus Fieldbus connection with RS 232 interfaceThe slave interface is Pro Gate enables the connection of field bus devices to the Profibus with a RS 232 interface. In case of large quantities the interface can be integrated into the device with an add-on board, a Piggy Board. In this case the data exchange is linked through a dual ported RAM, th... [more]January 2001 Fast access to a CAN networkFast access to a CAN network with an universal USB interface offers the CAN dongle is CAN USB from ifak system GmbH. Mobile set up as well as configuration with the available Windows operating systems are done easily. Desktop PCs and notebook devices without installed CAN adapter can be taken into t... [more] | ||