isPA Bustester
| The isPA Bustester is an all-purpose measurement and maintenance tool applicable for Profibus PA fieldbus systems.The Bustester is connected to the bus via a M 12 connector or three 4 mm terminal plugs.The LC-Display shows the menu and the test results. The menu can be navigated easily via a keyboard. As for all Profibus PA networks the baud rate is 31,25 Kbit/s. Offline mode To check the network the Bustester, instead of the coupler, has to be connected to the PA-bus. While the network is in offline mode and due to the short circuit measurement it is possible to review if there are incorrect connections between the lines or between the line and screen. Interrupts, short circuits as well as missing or incorrect bus terminators of the bus line can be easily checked and localized with the reflection measurement. Online mode While the network is in online mode the Bustester is connected to the bus via a connection box. Without interrupting the network the Bustester shows the bus supply voltage, a list of all bus-connected slaves and their addresses and accordant transmission levels. The jitter measurement shows the temporal variance of the data signal. The level measurement tests the correct impedance of the bus terminator. |
|
| Measurements (HxBxT) | 190 x 85 x 30mm |
| Weight | 230g (without battery/accumulator) |
| LC-Display | 4 x 20 signs, field vision 58 x 21mm |
| Baudrate | 31,25 kBit/s |
| Interfaces | 3 x 4mm terminal plugs and 1x M12 connector |
| Protection | IP 50 (at close battery compartment) |
| Current supply | 3 x AA battery cell or NiCd/NiMh accumulator |
Any questions? Please contact our service. Mr. Sören Scharf is at your disposal.
e-mail: ik_support@ifak-system.com
e-mail: ik_support@ifak-system.com