isSimocode Pro DTM

The isSIMOCODE DTM is a DeviceDTM according to the FDT specification for the drive control SIMOCODE Pro C und SIMOCODE Pro V of Siemens. The motor protection and control device with communciation capability which can be linked to the Profibus DP protects three phase loads against thermal overloading by means of integrated motor protection functions. All protection functions can be parameterized to respond by issuing a warning or shutting down the controller.
The DeviceDTM communicates with the drive control device via a CommunicationDTM using Profibus DP (MSAC2 services). The graphical user interface of the DTM allows:

• Set and change of device parameters. After the selection of a control function with SIMOCODE Pro C/ Pro V the device has to be parametrized. That means e.g. to select suitable values for CLASS or for the moter set current and to establish device-internal connections. Logical connections between individual device functions can be established.
• Use of online functions for control and diagnosis

Offline/Online Parameterization
The dialogs offer all functionalities to configure the drive control of SIMOCODE Pro C and SIMOCODE Pro V. The tree view shows several pages to configure the parameters, e.g. overload, sensor, motor etc. In offline state all changes and settings are stored locally in the DTM and are not sent to the device. Later, in offline state, the changes are transfered to the drive control by performing a parameter download.
In online state the DeviceDTM offers additional dialogs to view messages and diagnosis data and to control the devices SIMOCODE Pro C and SIMOCODE Pro V:

• Dialog "Control" used to control the feeder. A hardware test can be executed.
• Dialog "Display/Diagnostics" displays the operating current as well as many values
• Dialog "Statistics data" displays the values of operating hours, number of trips and number of starts
• Dialog "Test" shows the logical states of internal inputs